Stone Soap
- Description
- Features & Benefits
- Substrates
Stone Soap is a highly concentrated, heavy duty cleaner formulated for cleaning without harming finished surfaces. Stone Soap is a 100% biodegradable product, which does not need to be rinsed off. Stone Soap is a user friendly, environmentally-responsible product that is excellent for cleaning any surface.
- User friendly
- Equally effective in hard or soft water
- Neutral pH cleaner
- 100% biodegradable
- Can be safely used in confined environment
Use Stone Soap to clean:
- X-Bond Microcement
- Existing concrete or sealers
- Ceramic tile and grout
- Natural stone
- WR board
SEMCO LIQUID MEMBRANE™️ APPLICATIONS
Stone Soap is required for substrate preparation when installing our SEMCO Liquid Membrane™️ over the following substrates:
- Concrete & Fibreglass Pools / Ponds
- WR Board
- Existing concrete surfaces
Download Product Datasheet
Application Instructions
Prep A (Concrete & WR Board)
PREPARE YOUR SPACE AND GATHER YOUR MATERIALS
Ensure your surface is free of any debris. Gather all the products and tools needed for your project.
WASHING PROCESS
- Mix 1 part Stone Soap with 4 parts of water.
- Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate.
- Apply the Stone Soap mixture lightly with a pump sprayer and allow to sit for 2-3 minutes.
- Scrub the surface using a scrub machine or nylon brush.
- Rinse the surface off well and ensure no residue is left.
ADDITIONAL INFORMATION
• Always let surface completely dry prior to application of SEMCO Liquid Membrane or sealers.
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems.
Prep B (Fibreglass & Asphalt)
PREPARE YOUR SPACE AND GATHER YOUR MATERIALS
Ensure your surface is free of any debris. Gather all the products and tools needed for your project.
WASHING PROCESS
- Mix 1 part Stone Soap with 4 parts of water.
- Mix 1 part Power Cleaner with 4 parts of water.
- Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate.
- Apply the Power Cleaner mixture lightly with a pump sprayer and allow to sit for 2-3 minutes.
- Scrub the surface using a scrub machine or nylon brush.
- Rinse the surface off well and ensure no residue is left.
- Repeat all steps in this task with Stone Soap to clean chemical residue.
ADDITIONAL INFORMATION
• Always let surface completely dry prior to application of sealers
• Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems
Prep D (Concrete Pools / Ponds & Bricks)
PREPARE YOUR SPACE AND GATHER YOUR MATERIALS
Ensure your surface is free of any debris. Gather all the products and tools needed for your project.
WASHING PROCESS
- Slightly wet surface with water prior to applying Nu-Lift Cleaner.
- Apply undiluted Nu-Lift Cleaner on to the surface. and allow to sit for 2-3 minutes.
- Scrub the surface using a scrub machine or nylon brush.
- Rinse the surface off well and ensure no residue is left.
- Mix 1 part Stone Soap with 4 parts of water and allow to sit for 2-3 minutes.
- Scrub the surface using a scrub machine or nylon brush
- Rinse the surface off well and ensure no residue is left.
ADDITIONAL INFORMATION
- Always let surface completely dry prior to application of SEMCO Liquid Membrane or sealers.
- Do not use Muriatic Acid to prep surfaces as residue may lead to adhesion problems.
Cleaning X-Bond Microcement
- Ensure your surface is free of any debris.
- Mix 1 part Stone Soap with 4 parts of water.
- Slightly dampen the surface with water. This will prevent cleaners to penetrate deep into the pores of the substrate.
- Apply the Stone Soap mixture lightly with a pump sprayer and allow to sit for 2-3 minutes.
- Scrub the surface using a scrub machine or nylon brush.
- Rinse the surface off well and ensure no residue is left.
